|
|
Vibration damper development and innovation of a laboratory stand
Filipi, Jaroslav ; Mazůrek, Ivan (referee) ; Nevrlý, Josef (advisor)
Bachelor work deals with description and functionality of vibration dampers. Since the vibration dampers is a wealth of species, work is focusing on the dampers used in cars known as shock absorbers suspension. I have described conventional shock absorbers suspension and modern shock absorbers suspension. Furthermore, I described active chassis. High-quality equipment is very important for the future development of dampers. I propose possible ways of innovation existing laboratory stand.
|
|
|
Springing and Damping of Truck Cabin
Kroupa, Ondřej ; Vančura, Jan (referee) ; Blaťák, Ondřej (advisor)
This Diploma Theses, which can be included in the field of vehicle dynamics, explores the effect of suspension and damping of truck cabs for the safe ride and comfort. As the driver spends many hours in their vehicle, comfort is the most essential criterion. That is why we seek possible improvements which are offered by the sprung cab. The research part firstly analyses the individual elements of suspension and damping. The following chapter is devoted to the systems which are used nowadays in the construction of cabin suspension. Next there is the introduction to the theoretical production of a simplified computational model as well as the presentation of the possible evaluation of the achieved results. The following practical part deals with the actual shaping of the computational model in the Adams View software, which is based on a real vehicle, and was lent at the faculty. The model is then verified and compared with the existing state and the cab mounting concepts are tested on it. The effects of cab parameters on driving comfort and safe riding were tested on it as well. The last part focuses on the forming of the special Dakar computational model, on which optimization was performed according to the findings discussed in the previous chapter. Also, the appropriate configurations to the real-life testing were designed.
|
|
|
Optimization of the existing construction of magnetorheological clutch
Bedřich, Miroslav ; Růžička, Bronislav (referee) ; Roupec, Jakub (advisor)
This work deals with the reconstruction of magnetorheological (MR) clutch. The extensive research on the use of magnetorheological technology in practice was developed in the first part. The function of MR dampers, MR brakes and MR clutches were described. Some parameters of MR clutches were listed and compared. The second part concentrates on construction modifications to improve some parameters of MR clutch. The experiments verifying improvement of operating parameters of MR clutch were carried out in the third part.
|
|
|
Simulation modeling of a vibration absorber
Kukačka, Radek ; Vetiška, Jan (referee) ; Březina, Lukáš (advisor)
The bachelor thesis gives an overview of different design solutions to car shock absorbers. The rest of the thesis describes a simplified model of passive shock absorber and its optimization. The survey contains shock absorbers used in the present. There are various passive telescopic dampers and modern semi active and active electronically controlled damping systems. The second part includes several simplified models of passive dampers. There is described an optimization of the damper parameters with respect to the displacement of the primary mass for each of the models.
|
|
|
On-road Diagnostic of Vehicle Damper
Vaněk, Vojtěch ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
The diploma thesis deals with the analysis of the effects of shock absorber wear on the driving dynamics of the vehicle. Furthermore, a quarter model of the car was created in the Simulink software, where a procedure for evaluating the condition of the shock absorber while driving the vehicle was created. This procedure was subsequently validated on real measured data from the Hummer H3 car.
|
|
| |
|
|
Overhead Line Protection against Climatic Effects
Sýkora, Martin ; Topolánek, David (referee) ; Orságová, Jaroslava (advisor)
The outdoor overhead lines are influenced by additional load pressure of wind and frost. These can have adverse reaction on outdoor conduction of the electric power. My bachelors' report deals with separate climatic effects and possibilities of their resolution. It it also concentrates on removing the negative influences caused particularly by wind and on the possibilities of liquidation of the frost that had already originated.
|
|
|
Vehicle Semi-active SuspensionSystem
Salcburger, Martin ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
The aim of this diploma thesis is to design algorithms of semi-active suspension system for a quarter car model, compare their function with respect to ride comfort and drive safety. Consequently, setup control algorithms for using in the Adams software. The result of this thesis should be to determine the effect of semi-active suspension control system on vehicle behavior.
|
|
|
Design of Mining Dumper
Tulik, Richard ; Paliatka, Peter (referee) ; Zvonek, Miroslav (advisor)
The main intent of the thesis is design of articulated mining dumper. The contet of own designed mining dumper respects technical, aesthetic and ergonomic requirements. The thesis brings a new perspective of design solution in category of currently the most powerful articulated mining dumpers.
|
|
|
On-Road Damper Force Measurement
Hornák, Filip ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
The first part of the master's thesis deals with basic types and functions of dampers, together with a search of commonly used methods of damper force measurements. Consequently, a design of an on-road damper force measuring assembly is made and positioned onto a 3D model of a vehicle's damper. In the final part of the thesis there is made an evaluation of conditions of use of the measuring assembly together with its versatility.
|
guest ::
